Apart from a lot of small repairs over the years, the 16,000 square foot metal roof on this Osprey warehouse basically hadn’t been touched in 20 years, and it had rust in spots. The warehouse sits right behind a furniture store.

What do you do with rust before coating a metal roof?
Rust came first on this Osprey warehouse. The Troyer Commercial Roofing crew washed the roof with Rust Off, cut out the metal pieces that had rusted through and replaced them, then sprayed on Encase rust inhibitor primer. Here the rust was handled before any coating went on, so the coating wasn’t covering up a problem. Lester has been roofing since 2007.
How do you stop a metal roof from leaking at the seams?
Troyer Commercial Roofing covered every splice and seam on this Osprey roof, which meant a lot of bending. The crew applied Conklin Benchmark base coat over each seam and laid Spun Flex fabric into the wet base coat so the two stick together, then rolled a second coat of base coat over the top. Every screw head was caulked by hand with Lifetime Kwick Caulk, and every protrusion on the roof was sealed off. The caulk and base coat had to dry completely before the top coat went on. Once the top coat was on, the coated roof is rated at 85 percent reflectivity with a UL 790 Class A fire rating.

What did the full restoration involve?
Restoring this Osprey warehouse roof meant keeping every sound panel and replacing only the metal rust had eaten through:
- Pressure washed the roof with Rust Off
- Cut out the rusted pieces of metal and replaced them
- Sprayed on Encase rust inhibitor primer
- Applied Conklin Benchmark base coat to every splice and seam
- Pressed Spun Flex fabric into the base coat on every seam
- Rolled in a second coat of base coat
- Caulked every screw head by hand with Lifetime Kwick Caulk
- Sealed off every protrusion on the roof
- Let the caulk and base coat dry completely, then finished the whole roof with a white Conklin PUMA XL top coat
- Touched up the silicone areas and cleaned up all debris
Keeping the metal panels in place made this restoration very cost effective next to all new metal.
Is this restored roof warranted?
This Osprey warehouse roof is warranted against leaks for 20 years. The warranty covers materials and workmanship.
Can a metal roof be restored while the business stays open?
The furniture store in front of this Osprey warehouse stayed open. Restoring the roof meant no tear-off, no dumpster and no mess, and Troyer Commercial Roofing worked during store hours, so the furniture store’s customers saw no interruption.

How long does it take to restore a rusty metal roof?
Four days of crew work covered all 16,000 square feet of this Osprey roof. From signed contract to finished roof took 26 days. The owner signed on May 12, 2025, and we finished the roof on June 7.
Does Troyer check the roof after the job?
Yes. About a month after finishing this Osprey roof, Tony went back to walk it again and make sure everything was good. The owner was very happy with how it turned out. Going back after the job is what Lester and Tony do. You’ll find our metal roof restoration work and the commercial metal roofing we install on their own pages. If your own metal is rusting, book a free roof inspection.
Troyer Commercial Roofing provides commercial roofing in Sarasota, Bradenton, Lakewood Ranch and Venice. We also serve Nokomis, Osprey, Port Charlotte and North Port.
Call Tony at (941) 564-5614.







